考察大家图层管理技巧+2,截至10.15

zhangyanbo77

做出来了，不知对否，感谢楼主给予学习的平台，感谢29楼的学习资料，我是从他的资料当中学习的，再次感谢！

[ 本帖最后由 zhangyanbo77 于 2008-10-7 17:21 编辑 ]

NEVERGUO

原帖由 wuxiang 于 2008-10-3 19:56 发表
想来想去,功能虽不错,但觉得不是很实用,每个特征都在每个层,而工作中用到的一般都是面一个层,实体一个层,曲线一个层,基准一个层,得按特征来分层的话,对层的管理又有些麻烦了,
但版大这么提出一定有他老人家的道理,呵 ...

2.0可以实现,所有PRO版本都能实现!!!!

29.30楼基本已经将答案贴出了!!!大家加油!!!

jgb123

不懂 哦！看起来是不做的哦

任我游nemo

樓主的意思是：連拉伸都可自動入層了，那曲面曲線的不更容易了麼

任我游nemo

前一陣偶也玩了下這個自動層，考慮到其他的層模板文件中都有了，就添加了圓角跟倒角之兩個層﹔
結果轉入2D后，硬是多出了兩個層（平時用慣了只有0層的），趕緊找格式刷來刷

xtchukd

proe野火版配制文件本来就有一些,你想要么子入层都可以加入
. ---------------------------------------------------------------------------------------------------------------------
create_numbered_layers yes def_layer layer_3d_items def_layer layer_ext_copy_geom_feat 外部拷贝（原来我先前设置的可以这样简单地做出来呀） def_layer layer_quilt 面组 def_layer layer_skeleton_model 骨架模型 def_layer layer_protrusion_feat 拉伸 def_layer layer_round_feat 导圆角 def_layer layer_draft_feat 拔模（可以快速查阅产品拔模）后的文字是自己任意加上去的 def_layer layer_chamfer_feat 导角 def_layer layer_cut_feat 切除 def_layer layer_thread_feat 修饰螺纹

myna619

mapkey extern-copylayer @MAPKEY_LABELextern copy geom to layer;\
mapkey(continued) ~ Activate `main_dlg_cur` `ProCmdViewLyrs.view`1 ;\
mapkey(continued) ~ RButtonArm `main_dlg_cur` `PHTLeft.PHLayerUI.AssyTree` `node0AY0001`;\
mapkey(continued) ~ PopupOver `main_dlg_cur` `LayerActionMenu`1  `PHTLeft.PHLayerUI.AssyTree`;\
mapkey(continued) ~ Open `main_dlg_cur` `LayerActionMenu`;\
mapkey(continued) ~ Close `main_dlg_cur` `LayerActionMenu`;\
mapkey(continued) ~ Activate `main_dlg_cur` `ActionMenuLayerNew`;\
mapkey(continued) ~ Update `newlayerprops` `LayerNameInput` `extern-copy-geom`;\
mapkey(continued) ~ Select `newlayerprops` `PropTab`1  `RulesDefsettingsLay`;\
mapkey(continued) ~ Select `newlayerprops` `RuleOptionsCasc`;\
mapkey(continued) ~ Close `newlayerprops` `RuleOptionsCasc`;\
mapkey(continued) ~ Activate `newlayerprops` `IndepRulesChk`1 ;\
mapkey(continued) ~ Select `newlayerprops` `RuleOptionsCasc`;\
mapkey(continued) ~ Close `newlayerprops` `RuleOptionsCasc`;\
mapkey(continued) ~ Activate `newlayerprops` `AssocRulesChk`1 ;\
mapkey(continued) ~ Activate `newlayerprops` `EditRulesBtn`;\
mapkey(continued) ~ Select `selspecdlg0` `RuleTypes`1  `Type`;\
mapkey(continued) ~ Open `selspecdlg0` `ExtRulesLayout.ExtTyperuleLayout.TyperuleTypesList`;\
mapkey(continued) ~ Close `selspecdlg0` `ExtRulesLayout.ExtTyperuleLayout.TyperuleTypesList`;\
mapkey(continued) ~ Select `selspecdlg0` `ExtRulesLayout.ExtTyperuleLayout.TyperuleTypesList`1 \
mapkey(continued)  `Exten Copy Geom Type#2, 6`;~ Activate `selspecdlg0` `SelectButton`;\
mapkey(continued) ~ Activate `newlayerprops` `OkBtn`;\
mapkey(continued) ~ RButtonArm `main_dlg_cur` `PHTLeft.PHLayerUI.AssyTree` \
mapkey(continued) `node0:EXTERN-COPY-GEOM`;\
mapkey(continued) ~ PopupOver `main_dlg_cur` `LayerActionMenu`1  `PHTLeft.PHLayerUI.AssyTree`;\
mapkey(continued) ~ Open `main_dlg_cur` `LayerActionMenu`;\
mapkey(continued) ~ Close `main_dlg_cur` `LayerActionMenu`;\
mapkey(continued) ~ Activate `main_dlg_cur` `ActionMenuLayerBlank`;\
mapkey(continued) ~ RButtonArm `main_dlg_cur` `PHTLeft.PHLayerUI.AssyTree` \
mapkey(continued) `node0:EXTERN-COPY-GEOM`;\
mapkey(continued) ~ PopupOver `main_dlg_cur` `LayerActionMenu`1  `PHTLeft.PHLayerUI.AssyTree`;\
mapkey(continued) ~ Open `main_dlg_cur` `LayerActionMenu`;\
mapkey(continued) ~ Close `main_dlg_cur` `LayerActionMenu`;\
mapkey(continued) ~ Activate `main_dlg_cur` `ActionMenuSaveStatus`;\
mapkey(continued) ~ Activate `main_dlg_cur` `ProCmdViewLyrs.view`0;


还是觉得这个好用。用楼主那个功能在工程图中会自动生成1~32层，烦人

浪客_剑心518

刚学会.

fangchen5228

不懂，来听大师讲解！！

wangxinhua947

谢谢 。。。。